Open telnet with ATUD
usrConsole to logon.
Setup TP or Setup SP is the common setup commands.
Check ONLINE Lamp is lit.
ASECL to assign MAC to LENS
The lamps for CONF, ANNC, MOH will flash if not set up. They will extinguish when setup.
Data memory backup is recommended after confirming the VS32(Dual) assignment on the Telephony Server. See the procedure below:
1. Execute ASECL command to confirm the setting.
2. On “Certified Terminal Assignment” tab, check “Certified Terminal” and then click Read button.
3. Certified Terminal List is displayed. Confirm the MAC address of assigned VS32(Dual) is listed.
4. Execute MEM_HDD/MEM_HDD_N command to backup the data memory.
5. Select “MEM ® HDD” in Function, “Data Memory” in Data Type, and then click Execute button.
Refer to Office Data Backup in Operation and Maintenance Manual for more detailed information.
SETUP WAVEFILE <IP ADDRESS OF FTP SERVER> for music source file setting respectively. It then asks for user and password for FTP.
3 to send files from the VS3210
5 to send VS32 stored files to FTP
Volume adjustment can be done on the file you upload or Command is: APDIL
Have to select other tab and VS(Music) from the drop down. Select setting and then set the transmit pad values back to 0 for both station and co line(d) calls
To Remove a VS32 or add a new one you need to use AIVSL. MAKE SURE you tick the box for SIP, otherwise the VS won't register. You put in the MAC of the VS32, and it will show any existing LENS used by a VS32
Usually channels 0-15 are used for 3 party conferening. 16-31 are used for MOH.
Managing the music is done by AAEDL. You select VS, TN1, EQP 64 and you'll see LGRT (usually 90 for MOH) and the ANP is the WAV file number. In NBS we use 100.wav.
When deploying with new extension numbers you must always create the new extensions within the AIVSL command, you add them in there and not in DLEN, AISTL or anywhere else. Once created, in order to add them to N hunt groups commands you must always do an ALGSN 1-1 map.
If you're doing a meet-me conference, you need to ensure ALGSN is mapped, then use ASHPN to create hunt groups for each party conference bridge.